Powerful, reliable and customizable
The 69180 Large Horizontal Autoclave takes hospital and surgery center autoclaves to a whole new level of quality, safety, flexibility and turnover capacity. In addition to the wide range of options, the model can be reconfigured on demand to fit the layout of your facility.
High-Capacity Turnover
With a large 1010 Liter chamber your central sterile supply department (CSSD) can turn-around a large quantity or reusable surgical instruments minimizing bottlenecks in sterile supply.
Green Water Saving
AquaMinimal systems (optional) minimize water consumption between 50% and 90%
Diverse Load Types
The 69180 autoclave is programmed with 8 perfectly optimized cycle programs that cover the processing needs of most CSSDs and operating rooms
Advanced Touch Control
The large, colorful touch screen gives you an easy-to-read overview of real-time chamber values, as well as temperature and pressure trend graphs
Stainless Steel Piping
Piping is made of top-quality stainless steel to avoid corrosion and contamination of the sterilized loads
Load Traceability
Transfer cycle data and associated barcodes to a PC with optional remote monitoring software and barcode scanner
An optimized program for every load
The 69180 comes with 8 pre-set and 20 customizable cycle programs, as well as 2 standard diagnostic tests.
Data & Software
The 69180 gives you easy access to its cycle data. Via USB, Ethernet or printer.
Data & Software
The 69180 gives you easy access to its cycle data. Via USB, Ethernet or printer.
7" multi-color touch screen panels store the last 100 cycles in built-in memory
Multiple access levels and user passwords for added security
Diagnostic In/Out test enables checking each system component separately
USB Ports, Ethernet and Internal battery backup
Optional features include isothermal cycle for low temperature disinfection, software control and remote monitoring via R.PC.R. software
Technical specifications
Dimensions (W x H x D)
610mm x 910mm x 1815mm
Chamber Volume
1010 Liter
Electrical Supply
Three phase or one phase electrical power supply is available
Door Configuration
One or two doors, hinged with automatic locking.
Standards and directives
(a partial list)
Directives, Guidelines & Technical Standards
Company standards and legislation
ISO 13485:2016 “Quality Management System” – “Medical devices”
Medical Device Regulation 2017/745 as amended by 2001/83/EC
Medical Device directive (MDD) 93/42/EEC
Medical Device Single Audit Program- companion document (MDSAP)
ISO 9001: 2015 “Quality Management System”
ISO 14001:2015 environmental management system
2012/19/EU WEEE and EU 2017/2102 Restriction of the use of certain hazardous substances (RoHS Directive)
Tuttnauer pressure vessels are both ASME and PED certified. All ASME certified vessels are inspected by an independent authorized ASME inspector.
Product Standards
Pressure Vessel- ASME Code section I and section VIII. Div.I
Pressure Vessel- PED 2014/68/EU
Pressure Vessel- Chinese Regulations- Special Equipment Licensing Office
EN 285 “Large steam sterilizer"
ANSI/AAMI/ST8 Hospital Steam Sterilizers
IEC 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements EN
IEC 61010-2-040: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Requirements for sterilizers and washer-disinfectors used to treat medical materials
EN 61326-1 EMC Requirements for Electrical Equipment
IEC 62304: Medical Device Software – Software life cycle processes
Was this page helpful?
Specs, photos, documentation — tell us if anything is missing.
Thank you — your feedback is logged.