66120 Laboratory Autoclave Laboratory steam autoclave

Fast Cooling

Accelerated cooling technology increases the amount of cycles per day and protects the load by minimizing its exposure to high temperatures.

Rapid cooling safely reduces cooling time by as much as 75% without compromising the load. After sterilization is completed, air is passed through a microbiological filter.

Chamber temperature is decreased while pressure reduces and steam and condensate are drained.

The jacket is filled with purified cold water to help cool down the chamber to a safe temperature.

When the liquid’s temperature reaches the final set temperature, the cooling stage is complete.

Advanced Sterilization Cycles

F₀ Cycle – An additional challenge with liquid sterilization is the need to prevent extended exposure of liquid media to high temperatures which may harm the quality of the liquid media. The advanced F₀ optional feature assists in minimizing the time liquids are exposed to high temperatures during
sterilization thereby protecting liquid media, saving your laboratory time and reducing energy consumption.

Disinfection/Isothermal Cycle (70-95°C) – A flexible low Temperature cycle enables disinfection (“low” temperature
isothermal).

Air Removal, Vacuum Cycles

The autoclave’s vacuum pump efficiently removes residual air prior to sterilization, enabling effective penetration of steam.

The post-vacuum drying phase, at the end of the sterilization cycle, ensures complete drying of porous loads and hollow instruments. This guarantees that even the most difficult loads will easily reach sterility assurance levels.

Advanced Options

Advanced options allow for sanitary conditions to be maintained and satisfy stringent requirements for the biotechnology and food processing industries.

Separate Jacket and Chamber Connections enable reaching sterilization temperatures faster and improve temperature control. Often used for sterilizing liquids and vital when working with clean steam.