Standard Cycles |
|---|
• Solid and glassware loads at 134°C or 121°C for delicate loads (plastics) |
• Liquid loads and waste liquids at 121°C |
Standard Cycles added with optional features |
|---|
• Cooling Coil + Compressed Air |
• Fast cooling for liquid loads at 121°C |
Feature: Vacuum Pump |
|---|
• Pre-vacuum cycles |
• Solid and glassware loads at 134°C or 121°C for delicate loads (plastics) |
• Liquid loads and waste liquids at 121°C |
• Air Leakage Test Cycle |
Media Processing Cycles |
|---|
• Isothermal Processing: for preparing agar and other biological media with a temperature range from 60°C to 95°C that allows for gentle heating and cooling down of agar |
• Holding Temperature: Special program with programmable holding temperature at the end of the cycle to prevent cooling of media |
Special Custom Cycles |
|---|
• Specifically customized cycles upon request. These may include material stress test, ageing test, varnish test, and others. |
• Extended Sterilization Time: Special program with extended sterilization times up to 999 minutes |
• Multiple Cycle (Material Stress Test): Special program to automatically run multiple cycles on the same load |
Bowie & Dick Test Cycle
Chemical indicator in a product challenge device. Verify effective steam penetration. Also suitable for testing air removal with Helix test.
Vacuum Test Cycle
Verify the integrity of the pressure vessel and its plumbing on a periodic basis as
referred to in ISO 17665-1.
Print a hard copy of cycle data via optional printer
Store 200 cycles on your autoclave for reprinting or downloading to a PC
Easily transfer cycle data to a PC via USB
Connect to a local network for use with the optional RPCR Software for remote monitoring of up to 8 autoclaves
Generate PDF reports with graphs and tables using optional RPCR Software
Multi-level password protection
Overall Dimensions
720 (W) x 540 (H) x 765 (D) mm
Chamber Dimensions Ø x D
380 (Ø) x 500 (D) mm
Chamber Volume
65 L
Sterilization Temp. Range
105°C to 138°C
Voltage & Frequency
1 Phase
208V, 230V
50-60 Hz
Standards and directives
EN 61010-1: 2010 Safety Requirements for laboratory use
EN 61010-2-40: 2005 Safety requirements for sterilizers
EN 61326-1: 2006 Electrical Equipment for EMC Requirements
EN 17665-1: 2006 Sterilization of health care products - moist heat
2002/95/EC RoHS Directive
2006/95/EC Electrical Equipment
2004/108/EC Electromagnetic compatibility
2006/42/EC Machinery Directive
2002/96/EC WEEE Directive
ANSI / AAMI – ST55: 2010 Tabletop steam sterilizer
EN 13060: 2004+A2: 2010 - Small Steam Sterilizer
EN ISO 13485:2012 Quality Management System
Canadian MDR (CMDR) SOR/98-282 (2011)
In compliance with FDA QSR 21 CFR part 820 & part 11
ASME Code, Section I, for Boilers
Tuttnauer quality systems are ASME certified. All ASME certified autoclaves are inspected by an independent authorized ASME inspector.
Was this page helpful?
Specs, photos, documentation — tell us if anything is missing.
Thank you — your feedback is logged.