T-CLEAN N

Properties

Restores the initial brilliance of degraded or discolored instruments
Removes alkaline residues, mineral scale and rust stains
Restores stainless steel surface finish
Keeps the washer disinfector’s chamber clean and shiny
Very economical: 0.05% to 0.4% dilution
Does not contain any surfactants
Prevents corrosion and instrument discoloration

Instructions for use

In automatic washers: Tuttnauer T-CLEAN N is to be used in washer disinfectors at a dilution from 0,5 ml/l. (0,05%) to 4 ml/l. (0,4%). The dilution rate depends on the quality and temperature of the water. The solution has to be rinsed off after use. The use of deionized water should be preferred. Always follow the washer manufacturer’s instructions
In immersion bath as instrument renovator: Dilute 20 ml. to 40 ml. of T-CLEAN N in 1 litre of water (2% to 4% dilution). Stir gently. Immerse the instruments into the solution. Let them soak from 5 min. to 15 min. Brush them gently to renovate weathered areas. Your instruments should have regained their initial brilliance. Rinse carefully your instruments with running water and wipe them with a single use paper

For professional use only
Do not mix with other products
The packaging must be closed tightly after use
Store between +5°C and +35°C

Packaging

5 liter canister (PN. WSH238-0012)
1 liter canister (PN. WSH238-0017)

Physical Properties

Appearance: Transparent solution
Density: 1.50 g/cm3 at 20˚C
pH (0,5 - 4 ml/l.): <2 at 20˚C
Viscosity: <20 mPas at 20˚C
Storage: 5˚C - 35˚C
Stability: 3 Years
Biodegradability: According to OCDE 301D

Compatibility

Tuttnauer T-CLEAN N is compatible with most materials like stainless steel, glass, ceramics and acid resistant materials. Material compatibility with sensitive materials should always be checked before use.