T-CLEAN R

Rinse aid for the automated reprocessing of surgical instruments and equipment

Tuttnauer T-CLEAN R is a very concentrated solution especially formulated for the fast and spotless drying of surgical instruments, glassware, and other sensitive medical devices. It can be used on stainless steel instruments, ophthalmological instruments, anesthetic equipment, laboratory glassware, plastics and hard rubbers.

Tuttnauer T-CLEAN R reduces the surface tension of the water on the instruments allowing them to dry quickly without leaving any residues.

Tuttnauer T-CLEAN R can be used in automatic washers, washer disinfectors, cart and tunnel washers or other instrument reprocessing equipment.

T-CLEAN R Detergent for washers - Tuttnauer

 

Properties

  • Drastically shortens drying time
  • Leaves the instruments filmless and spot free
  • Very economical: 0,01% to 0,03% dilution
  • Can be used in soft or hard water
  • Does not foam, prevents corrosion and instrument discoloration
  • Appropriate for heat-resistant as well as heat-sensitive instruments

Compatibility

Tuttnauer T-CLEAN R is compatible with most materials such as stainless steel, aluminum, glass, ceramics, hard plastics, ebonite, etc. Material compatibility with sensitive materials should always be checked before use.

Certifications

  • CE mark according to the medical devices MDR Regulation (EU) 2017/745
  • Medical device class I
  • Tuttnauer T-CLEAN R has been tested according to ISO 10993-1 and is not toxic

Packaging

  • 5 liter canister (PN. WSH238-0011
  • 1 liter canister (PN. WSH238-0016)

Physical properties

  • Appearance: Transparent yellow solution
  • Density: 1.02 g/cm3 at 20˚C
  • pH: 6.0-7.0 at 20˚C
  • pH (0,2-0,8ml/l): 7.0-8.0 (neutral) at 20˚C
  • Viscosity: <50 mPas at 20˚C
  • Storage: 5˚C - 35˚C
  • Stability: 3 Years
  • Biodegradability: According to OCDE 301D

Composition

Non ionic surfactants 15% - 20%, phosphonates, corrosion inhibitor, pH regulator, excipients.

Instructions for use

Tuttnauer T-CLEAN R is to be used in washer disinfectors during the rinsing cycle at a dilution from 0,1 ml/l. (0,01%) to 0,3 ml/l. (0,03%). The dilution rate depends on the quality and temperature of the rinse water. For best results, the use of deionized water is preferred.

The packaging must be closed tightly after use.

  • Always follow the washer manufacturer’s instructions.
  • For professional use only.
  • Do not mix with other products.
  • Store between +5°C and +35°C.

Buy it with

Need more Information?
¿Ayuda para elegir?
¿Listo para realizar su pedido? estamos aquí para ayudarlo con cualquier pregunta que pueda tener